Wider and stronger and even slightly lighter than the Stans Flow Mk3 rim with a 30mm internal width. The spoke drilling is offset by 3mm which improves wheel strength. Designed for tyre widths between 2.30 and 2.60. (for tyres between 2.25 and 2,5 also consider the slightly narrower/lighter Stans Arch Mk3 rim - see our other listing). These rims are designed to be used tubeless (with Stans sealant) but can also be use with Presta valve tubes.
For more detail on the Mk4 rims see. Hubs are lightweight but pretty tough Novatec D791SB/D792SB.The standard HG freehub is suitable for 9,10 and 11 speed Shimano MTB cassettes and 9 or 10 speed SRAM MTB cassettes. For Shimano 12 speed MTB cassettes with a 10 toothe small cog, please specify a Microspline freehub. For SRAM 12 speed MTB cassettes with a 10 tooth small cog, please specify a XD Driver freehub.
These hubs have high quality sealed bearings. Disc brake attachment is by the international standard 6 bolt fixing. The front hub has a choice of QR, 15mm or 20mm thru axle and the rear hub has a choice of QR or 12x142.
Version, see our other listing. As standard, the 32 spokes per wheel are the high quality silver Sapim Race 2.0/1.8/2.0. Made from 100% stainless steel and fastened with solid brass nipples. The wheels are built using a 3x (3 cross) pattern which is the best compromise between strength without excess weight. Total wheelset weight around 1920g. Please specify axle and freehub requirements when you order. Also any optional extras which will be invoiced separately. For Boost hub version, see our other listing.Please note: The version shown in the photos has the optional black Sapim Race spokes. All our wheels are handbuilt to the same high standards.
Rims are true to +or- 0.2mm and spokes uniformly tensioned to within 10%. Please look at the other wheelsets and products available in our shop. If you have any questions please ask.